Gas Springs Application Spec Sheet

Please fill in the information on the form and click the submit button at the bottom of the page.  If you wish to include drawings of the application, we suggest you download a copy of the form and fax it with the drawings to the Attention: Engineering at (610) 430-7350. Drawings help identify available mounting points and limitations caused by interference points.

 To download a copy of the form click here.

Company
Contact Name
Title
Address 1
Address 2
City
State, ZIp	,
Telephone Number
Fax Number
Email Address
Approximate Annual Quantity Requirement
Type (Choose Below)
Type 1 - 90º Opening Type 2 - Restricted Opening Type 3 - Beyond 90º Opening Type 4 - Above Horizontal Opening Type 5 - 180º Opening Type 6 - Below Horizontal Opening Type 7 - Below to Above Horizontal Opening Type 8 - Other
Number of Springs per Lid	1 or 2
Weight of Lid (W)	lbs
Opening Angle (Ø)	degrees
Distance from Pivot to End of Lid (L)	inches
Distance from Pivot to Center of Gravity (C)	inches
Thickness of Lid	inches
Do you wish the lid to:	open automatically (lid will need a catch) to remain closed under it's own weight?
Do you require the spring to be mounted	inside, outside, either
Ambient Operating Temperature	ºF
Anticipated Number of Cycles per Minute
TYPE 7 ONLY
Distance of Center of Gravity Below the Pivot (B)	inches
Distance of End of Lid Below the Pivot (D)	inches
Comments